Pressure Fermenter – Apollo 30 litre Unitank

Apollo – 30L Unitank Pressure Fermenter

THE EAGLE HAS LANDED!

Take your brewing to new heights with the Apollo 30L Unitank Fermenter.

You’ll get pressure fermentation ability right out of the box with no need to upgrade or buy more parts!

Each tank is individually pressure tested and made in Australia.

Our radical new design features

• Wider 115mm CIP Capable Lid with Dry hop Port
• 30L Conical Tank Manufacture From High Strength – Clear P.E.T.
• Stainless Steel Plunge Valve/Thermowell
• Multi Pressure Option PRV Selection
• Built in Handles
• New Stainless Steel Stand Design
• Centralised Floating Dip Tube Alignment
• Collection Bottle
• Volume Indicator

Apollo is ready to take your fermentations to a level of control higher than any other P.E.T. pressure fermenter!

Take command of your new fermentation vessel that will provide you with the ability to:

Ferment Under Pressure – Select the pressure setting you require from the x3 PRVs included

Dump Trub and Harvest Yeast – Innovative Plunge Valve and Collection Bottle Design

Dry hop Sanitarily – Use the Dry Hop Port in the lid

Carbonate in the Fermenter – Pressure Rated Operation up to 35psi and pressure tested tank up to 5 Bar

Monitor Internal Temps – Use the thermowell with your temp controller’s probe to get accurate liquid temp readings

Serve Directly From The Tank – Hook up to your tap and use Apollo like a keg

Get Oxygen Free Keg Transfers – Move your fermentations to keg or packaging without introducing

INSTRUCTION MANUAL AVAILABLE HERE

Dimensions: 690mm to Lid + 30mm to the top of the posts

405mm wide

*Please Note: Phosphoric acid sanitisers should have the pH range between 2.2 – 2.8. This is about a 1.5 – 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer.

Heat does more damage to PET fermenters than chemicals. Above 50 degrees Celsius, the PET can soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 40 degrees C before use.

Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life.

*ALL FERMENTERS ARE STORE PICK UP ONLY